DESCRIPTION
Maximized productivity
Fastest cut speeds in its class produce more finished parts per hour
Engineered with 100% duty cycle for the most demanding production environments.
Automatic settings, tool free leads and optional quick disconnect torches let you quickly transition between cutting, gouging, mechanized and handheld processes
Superior cut quality and consistency minimize the need for costly secondary operations
Easy operation
Optimized cutting parameters are automatically set and controlled in one step to deliver consistent results without operator intervention
Advanced diagnostics simplify troubleshooting and service
Optional serial communications allow full control of the system from the CNC
Low operating cost
Patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels
Advanced consumable technologies including LongLife, CoolFlow™ and TrueFlow™ significantly increase consumable life to reduce cost per part
Longer consumable life = more cost effective
12 mm (1/2″) mild steel
200 A Air/Air, 30 m (100′) leads
Industry-leading reliability
Robust, simple system architecture with 50% fewer parts than most competitive systems
Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards
| nput voltages | 200/208 VAC, 3-PH, 50 Hz, 108/104 A 220 VAC, 3-PH, 50 – 60 Hz, 98 A 240 VAC, 3-PH, 60 Hz, 90 A 380 VAC, 3-PH, 50 Hz, 57 A 400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A 415 VAC, CE, 3-PH, 50 Hz, 52 A 440 VAC, 3-PH, 50 – 60 Hz, 49 A 480 VAC, 3-PH, 60 Hz, 45 A 600 VAC, 3-PH, 60 Hz, 36 A |
|---|---|
| Output voltage | 50 – 165 VDC |
| Maximum output current | 200 A |
| Duty cycle rating | 100% @ 33 kW, at 40° C (104° F) |
| Operating temperature | -10° C to 40° C (+14° F to +104° F) |
| Power factor | 0.98 @ 33 kW output |
| Maximum OCV | 360 VDC |
| Dimensions | 102 cm (40.14″) H, 69 cm (27.12″) W, 105 cm (41.23″) L |
| Weight | 335 kg (740 lbs) |
| Gas supply Plasma gas Shield gas Supply gas pressure |
Air, O2, N2 Air, N2 6.2 +/- 0.7 bar (90 +/- 10 psig) |
Operating data
- Virtually dross-free cutting capacity – mild steel 20 mm (3/4″)
- Production pierce capacity – mild steel 32 mm (1 1/4″)
- Severance * – mild steel 75 mm (3″)
- Bevel – 200 amp consumables support 45 bevel capability
| Material | Current (amps) |
Thickness (mm) |
Approx. cutting speed (mm/min) |
Thickness (inches) |
Approx. cutting speed (ipm) |
|---|---|---|---|---|---|
| Mild steel Air plasma Air shield |
50 | 1 3 |
8050 3760 |
20 ga 0.135 |
340 110 |
| Air plasma Air shield |
130 | 6 12 |
3865 2045 |
1/4 1/2 |
150 75 |
| Air plasma Air shield |
200 | 6 12 20 25 32 50 |
4885 2794 1415 940 630 215 |
1/4 1/2 3/4 1 1 1/4 2 |
190 110 60 35 25 8 |
| O2 plasma Air shield |
50 | 1 3 |
6775 3650 |
20 ga 0.135 |
270 130 |
| O2 plasma Air shield |
130 | 6 12 |
3925 2200 |
1/4 1/2 |
150 80 |
| O2 plasma Air shield |
200 | 6 12 20 25 32 50 |
6210 3415 1920 1430 805 270 |
1/4 1/2 3/4 1 1 1/4 2 |
235 130 80 55 32 10 |
| Stainless steel N2 plasma N2 shield |
200 | 12 20 |
220 1140 |
1/2 3/4 |
80 50 |
| Air plasma Air shield |
200 | 12 20 |
3050 1520 |
1/2 3/4 |
120 60 |
* The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality.
Cutting at severance thickness should be infrequent.
